Back to Fluid Compatibility

Dimethyl Sulfate

Data is at 70°F (21°C) unless otherwise noted in the chemical name.

Metal

13 materials
MaterialRatingMeaning
Aluminum—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
Carbon Steel—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
Cast/Ductile IronAExcellent — fully compatible
304 Stainless Steel—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
316 Stainless Steel—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
Hastelloy C—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
BrassBGood — minor effect, generally suitable
Alloy 20CFair to Poor — moderate/severe effect, evaluate carefully
Alloy 40 (Monel)CFair to Poor — moderate/severe effect, evaluate carefully
Titanium—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
Duplex 2205, Cd4MCuCFair to Poor — moderate/severe effect, evaluate carefully
XM-19 Spring SteelDNot recommended — unsatisfactory / do not use
410 Stainless SteelCFair to Poor — moderate/severe effect, evaluate carefully
Legend:AExcellentBGoodCFair to PoorDNot recommended—No data

Important Engineering Disclaimer:
Compatibility data is a preliminary screening guide only. Verify against actual concentration, operating temperature and pressure, fluid impurities, velocity/erosion, corrosion allowance, gasket seating stress, mechanical seal arrangement, vendor recommendations, applicable code, project specification, and the current Safety Data Sheet before engineering use. Ratings reflect Graco Chemical Compatibility Guide (Updated 10/29/2024) and are not a current SDS/GHS classification.