Pipe Data Library
Comprehensive technical database for piping components governed by international standards (ASME, ISO, DIN, EN).
Pipe Dimensions
ASME B36.10M and B36.19M data for Carbon, Alloy, and Stainless Steel pipes. NPS 1/8 to 80 inches.
Fitting Dimensions
ASME B16.9 Butt-weld fittings and B16.5 Flanges. Geometric data for Elbows, Tees, and Reducers.
Flange Dimensions
Dimensional data for ASME B16.5, EN 1092-1, and planned JIS B2220 flanges including Weld Neck, Slip-On, Blind, and Socket Weld.
Valve Dimensions
ASME B16.10 face-to-face and end-to-end dimensions for Gate, Globe, Check, Ball, and Plug valves. Class 125 through Class 2500.
Valve Selection & Trim
Manual valve comparison, service selector, body/seat materials, API 600 trim numbers, special-service flags and check-valve orientation and velocity guidance.
Material Properties
Allowable stress, density, and modulus of elasticity for common piping materials per ASME B31.3 and B31.1.
Fluid Compatibility
Chemical resistance ratings for 1,719 fluids against metals, plastics, elastomer seals, packing, and mechanical seal faces. Preliminary material screening.
Pipe branch connection
Header-to-branch NPS lookup table for selecting Straight Tee, Reducing Tee, Sockolet, Weldolet, or reinforced pad branch connections.
Stud Bolt Size for Flange
Number of bolts, bolt diameter, and stud/machine bolt lengths for ANSI, DIN, and JIS flanges across Class, PN, and K pressure ratings.
Pipe Roughness Values
Absolute roughness (ε) values for Colebrook-White friction factor calculations, with recommended design values by pipe material and service condition.
Gasket Data
Gasket construction, flange-facing compatibility, preliminary seating factors, and ASME B16.20 spiral-wound dimensions.
Fitting Loss Coefficients
Crane resistance coefficients, fixed K values, equivalent length, and Darby 3-K constants for fittings and valves.
Insulation Material Data
Typical thermal-conductivity presets, reference temperatures, service classifications, and ASTM material standards.
HDPE Pipe Dimensions
PE80 and PE100 pipe dimensions per TIS 982-2556, DIN 8074/75-1999, and ISO 4427:2007-2. OD 16–1200 mm with PN/SDR pressure classes.
Non-Metallic Pipe Data
Dimension and material-property reference for uPVC, CPVC, PP-R, PVDF, FRP/GRP, copper and ductile iron per ASTM, ISO and AWWA standards.
Fluid Properties
Density, viscosity, and specific heat for common gases and liquids, plus temperature-dependent tables for air, water, and steam.
Flange P-T Ratings
ASME B16.5 pressure-temperature ratings by material group and pressure class. Carbon steel and 304/316 stainless, Class 150 through 2500.
Thermal Expansion
Mean coefficient of linear thermal expansion for carbon and alloy steel, stainless, nickel alloys, non-ferrous metals and thermoplastics for flexibility analysis.
Threaded Pipe (NPT)
ASME B1.20.1 Table 2 taper pipe thread data — NPS 1/16 through 24, pitch diameters E₀–E₅, engagement lengths L₁–L₅, published thread counts, and K₀ basic minor diameter for tap-drill selection.
Pipe Color Coding
ASME A13.1 pipe marking color scheme by hazard class, plus the minimum legend field length and letter height required for each pipe diameter.
Pressure Rating Conversion
Nominal cross-reference between ASME Class, EN/ISO PN and JIS K flange ratings, with the PN designation series in bar and psi for preliminary screening.
Instrument Tubing
316/316L tubing ratings plus bend radii, support spacing, fitting dimensions, material and cleanliness guidance, pressure-test planning and traced bundles.
Welding & Fabrication
Screening index for P/Group/F/A classifications, filler families, preheat and PWHT planning, weld end preparation (B16.25 bevel/root gap), socket/thread engagement, branch welds, BW/SW/THD/flanged joint comparison, NDE and dissimilar-metal welds.
Inspection, Corrosion & RBI
API-aligned damage mechanisms, CUI/CUF and SCC screening, qualitative RBI, CML/TML governance and traceable Remaining Life presets.
Control Valve Reference
Flow characteristics, rangeability, ANSI/FCI 70-2 leakage classes, fail actions, air-to-open/close, cavitation/flashing parameters & trim selection.
Piping Class Selector
Screen service category, pressure, temperature, corrosivity and sour service into a preliminary material spec, ASME B16.5 rating class, corrosion allowance and minimum NDE program.
Weld Examination & NDE
NDE method selection (VT/PT/MT/RT/UT), examination extent by fluid-service category, weld defect terminology and PMI, hardness and ferrite-number verification.
Allowable Nozzle Loads
Allowable force and moment reference tables and interactive evaluation engine for Centrifugal Pumps (API 610 Table 5 & Annex F), Air Coolers (API 661), and Steam Turbines (NEMA SM 23).
Line Blanks (ASME B16.48)
Figure-8 (spectacle) blanks, paddle blanks and paddle spacers per ASME B16.48-2010. Inside/outside diameter, centerline, thickness and web width by pressure class and flange facing.
Traceable Dataset Coverage
Catalog-level coverage, review status and source groups are tracked centrally. Confirm applicability against the governing project requirements before design use.