Back to Fluid Compatibility

Picric Acid

Data is at 70°F (21°C) unless otherwise noted in the chemical name.

Metal

13 materials
MaterialRatingMeaning
AluminumDNot recommended — unsatisfactory / do not use
Carbon SteelDNot recommended — unsatisfactory / do not use
Cast/Ductile IronDNot recommended — unsatisfactory / do not use
304 Stainless SteelDNot recommended — unsatisfactory / do not use
316 Stainless SteelDNot recommended — unsatisfactory / do not use
Hastelloy CDNot recommended — unsatisfactory / do not use
BrassCFair to Poor — moderate/severe effect, evaluate carefully
Alloy 20CFair to Poor — moderate/severe effect, evaluate carefully
Alloy 40 (Monel)DNot recommended — unsatisfactory / do not use
Titanium—No data — the source publishes no rating for this pair. Not a compatibility claim; verify independently.
Duplex 2205, Cd4MCuCFair to Poor — moderate/severe effect, evaluate carefully
XM-19 Spring SteelDNot recommended — unsatisfactory / do not use
410 Stainless SteelCFair to Poor — moderate/severe effect, evaluate carefully
Legend:AExcellentBGoodCFair to PoorDNot recommended—No data

Important Engineering Disclaimer:
Compatibility data is a preliminary screening guide only. Verify against actual concentration, operating temperature and pressure, fluid impurities, velocity/erosion, corrosion allowance, gasket seating stress, mechanical seal arrangement, vendor recommendations, applicable code, project specification, and the current Safety Data Sheet before engineering use. Ratings reflect Graco Chemical Compatibility Guide (Updated 10/29/2024) and are not a current SDS/GHS classification.