Back to Fluid Compatibility
Tartaric Acid
Data is at 70°F (21°C) unless otherwise noted in the chemical name.
Metal
13 materials| Material | Rating | Meaning |
|---|---|---|
| Aluminum | D | Not recommended — unsatisfactory / do not use |
| Carbon Steel | D | Not recommended — unsatisfactory / do not use |
| Cast/Ductile Iron | D | Not recommended — unsatisfactory / do not use |
| 304 Stainless Steel | C | Fair to Poor — moderate/severe effect, evaluate carefully |
| 316 Stainless Steel | C | Fair to Poor — moderate/severe effect, evaluate carefully |
| Hastelloy C | B | Good — minor effect, generally suitable |
| Brass | D | Not recommended — unsatisfactory / do not use |
| Alloy 20 | C | Fair to Poor — moderate/severe effect, evaluate carefully |
| Alloy 40 (Monel) | A | Excellent — fully compatible |
| Titanium | B | Good — minor effect, generally suitable |
| Duplex 2205, Cd4MCu | A | Excellent — fully compatible |
| XM-19 Spring Steel | D | Not recommended — unsatisfactory / do not use |
| 410 Stainless Steel | C | Fair to Poor — moderate/severe effect, evaluate carefully |
Legend:AExcellentBGoodCFair to PoorDNot recommended—No data
Important Engineering Disclaimer:
Compatibility data is a preliminary screening guide only. Verify against actual concentration, operating temperature and pressure, fluid impurities, velocity/erosion, corrosion allowance, gasket seating stress, mechanical seal arrangement, vendor recommendations, applicable code, project specification, and the current Safety Data Sheet before engineering use. Ratings reflect Graco Chemical Compatibility Guide (Updated 10/29/2024) and are not a current SDS/GHS classification.