Material Selection Assistant

Answer a few questions about your process conditions to get preliminary material recommendations.

⚙️Process Operating Conditions

1. Process Fluid / Service Type

Ambient temperature cooling, potable, and fresh water.

2. Design Temp (°C)

3. Pressure (barg)

4. Environmental & Corrosive ModifiersContains Chlorides (e.g. seawater, brine, CSCC risk >60°C)Sour Service (H₂S present - NACE MR0175)High Fluid Velocity / Slurry (Erosion risk)

Ready to Recommend Material

Select your fluid type, design temperature, pressure, and environmental modifiers on the left to receive an institutional-grade material recommendation.

ASME B31.3Temperature & allowable stress limits

NACE MR0175H₂S sour service hardness limits