Plastic Pipe
Thermoplastic pressure pipe and fittings including PE, PVC, and CPVC systems.
ISO 4427
ISOPolyethylene (PE) Pipes and Fittings for Water Supply
PE (PE80/PE100) pipes and fittings for pressurized water supply (and pressure drainage/sewerage), dimensioned by nominal pressure (PN) and standard dimension ratio (SDR).
TIS 982-2556
TISHDPE Pipe (Thai Industrial Standard)
The Thai national standard for HDPE (PE) pressure pipe, issued by the Thai Industrial Standards Institute (TISI). It covers PE80/PE100 pipe for pressurized water supply, dimensioned by PN and SDR and technically aligned with ISO 4427. It governs the pipe itself; PE fittings, valves, and fusion procedures fall under separate standards.
ASTM D3035
ASTMPE Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
PE plastic pressure pipe dimensioned by controlled outside diameter and dimension ratio (DR), published by ASTM International. It covers the smaller- and mid-diameter range of the North American OD/DR PE system (its large-diameter companion is ASTM F714) for water service, municipal utilities, and general pressurized liquids, using US PE material designation codes (e.g., PE4710) and the IPS/DIPS OD systems.
ASTM F714
ASTMPE Plastic Pipe (DR-PR) Based on Outside Diameter
Large-diameter PE plastic pressure pipe based on outside diameter and DR, published by ASTM International. It is the big-bore companion to ASTM D3035 (smaller sizes), covering pipe for potable and raw water, municipal and industrial sewage, process liquids, effluents, and slurries — including trenchless insertion (sliplining) renewal of deteriorated pipelines. It uses US PE material designation codes (e.g., PE4710) and the IPS/DIPS OD systems.
AWWA C906
AWWAPolyethylene (PE) Pressure Pipe and Fittings for Waterworks
PE pressure pipe and fittings, 4 in. (100 mm) through 65 in. (1,650 mm), published by AWWA for potable-water distribution and transmission in waterworks service. It defines PE materials, dimensions (by DR), pressure classes, fittings, and fusion-jointing suitability, and integrates PE into the AWWA waterworks family (fittings, valves, disinfection). The big-diameter companion to AWWA C901 (small-diameter service tubing).
ASTM D1785
ASTMPVC Plastic Pipe, Schedules 40, 80, and 120
Rigid poly(vinyl chloride) (PVC) pressure pipe in Schedules 40, 80, and 120, for distribution of pressurized liquids.
ASTM D2467
ASTMPVC Plastic Pipe Fittings, Schedule 80
Socket-type Schedule 80 poly(vinyl chloride) (PVC) pipe fittings for pressurized-liquid service compatible with the piping material.
ASTM F441
ASTMCPVC Plastic Pipe, Schedules 40 and 80
Chlorinated poly(vinyl chloride) (CPVC) pressure pipe in Schedules 40 and 80 for hot corrosive liquid service.
ISO 14692
ISOGlass-Reinforced Plastics (GRP) Piping
Qualification, manufacture, system design, and installation of glass-reinforced plastic (GRP/FRP) piping for the petroleum and natural gas industries.
AWWA C950
AWWAFiberglass Pressure Pipe
Fabrication and testing of fiberglass (GRP) pressure pipe and joints for aboveground and belowground water systems, roughly 1 in. through 156 in.
ASME NM.1
ASMEThermoplastic Piping Systems
Requirements for design, materials, fabrication, joining, installation, examination, and testing of thermoplastic pressure piping.
ASME NM.2
ASMEGlass-Fiber-Reinforced Thermosetting-Resin Piping Systems
Requirements for design and construction of glass-fiber-reinforced thermosetting-resin pressure piping systems.
ASME NM.3
ASMENonmetallic Materials
Material specifications, design values, properties, limits, and cautions for nonmetallic pressure piping.
AWWA C901
AWWAPolyethylene Pressure Pipe and Tubing
Requirements for smaller-diameter polyethylene pressure pipe, tubing, fittings, and joining for water service.
ASTM D2466
ASTMPoly(Vinyl Chloride) Plastic Pipe Fittings, Schedule 40
Dimensions and requirements for Schedule 40 socket-type PVC pressure fittings.
ASTM F439
ASTMChlorinated Poly(Vinyl Chloride) Plastic Pipe Fittings, Schedule 80
Dimensions and requirements for Schedule 80 socket-type CPVC pressure fittings.
ASTM D2996
ASTMFilament-Wound Fiberglass Pipe
Classification, dimensions, performance, and testing of filament-wound fiberglass pipe.